Connecting the compatible BTicino gateway

To access and automatically identify the compatible devices present on the BTicino system, Easykon Lite for MyHome must use a compatible BTicino gateway device.

You can use one of the following methods to connect to the BTicino gateway.

Use OPEN or HMAC password

Requirement:
  • Knowing your BTicino gateway OPEN or HMAC password

If you want to use the open password, the default one is “12345”

I don’t know the password

Connect your BTicino gateway with Open or HMAC password:
  1. Access to the configuration interface writing "http://easykon-lite.local" in the addresses bar of your browser
  2. Click on “Sign in”
  3. Select the gateway you want to connect
  4. Insert the password you used during MyHome gateway configuration (Open or HMAc, Easykon will recognise both)
  5. Click on "Connect" on the top

Make sure your BTicino gateway has the last firmware version, before connecting Easykon Lite for MyHome.

Easykon for MyHome doesn't find the gateway?

IP range

Requirement:
  • On the gateway it has to be setup the correct IP range

How can I set the correct IP range?

Connect the BTicino gateway:
  1. Access to the configuration interface writing "http://easykon-lite.local" in the addresses bar of your browser
  2. Click on “Sign in”
  3. Select the gateway you want to connect
  4. Check that the information on the gateway are correct and press on “Connect” on the top

Make sure your BTicino gateway has the last firmware version, before connecting Easykon Lite for MyHome.

Easykon for MyHome doesn't find the gateway?